您好!欢迎来到浙江多麦福电子科技有限公司!

收藏本站 在线留言 联系我们

全自动指纹锁,指纹锁厂家,楼宇门厂家

全国咨询热线
  • 159-2592-0086
  • 0579-87127885
  • 大家都在搜: 全自动指纹锁 指纹锁厂家 楼宇门厂家 玻璃楼宇门 万能互换指纹锁

    联系方式

    联系电话:15925920086

    浙江多麦福电子科技有限公司

    联系人:刘经理

    服务热线:0579-87127885

    传真:0579-87076885

    地址:浙江永康城西工业区花城中路城西物流园二区六幢

    当前位置:主页 > 新闻中心 > 公司动态 >

    楼宇门安装技巧以及注意事项

    作者:浙江多麦福网址:www.duomaifu.com人气:发表时间:2017-08-07 10:18

      楼宇门是一个单元住户的道保障,开闭频率也是频繁的。经常看到有的楼宇门没用多久就成了一道摆设,无法再自动闭合。选择好的产品加上的安装团队可以提高楼宇门的使用寿命。

      Building door installation skill and notice the building door is a unit resident's first safeguard, open and closed frequency is also the most frequently. It is often not long to see a building that can't be closed automatically. Choosing a good product plus a top-notch installation team can improve the service life of the building.

      下面玻璃楼宇门厂家提出一些楼宇门安装细节注意事项:

      Here are some details about the installation of building doors:

      1、工程楼宇门的安装应按照所采用的工程楼宇门种类,采取相适应的安装方法。

      The installation of the engineering building gate should be adopted according to the type of engineering building.

      2、要求推拉门安装后推拉灵活,平开门开启方便,关闭严密牢固。

      Push the sliding door to be installed and push to be flexible, open the door open, close tightly.

      3、工程楼宇门的门框可以采用膨胀螺栓与墙体固定,也可以在砌筑墙体时在洞口处预埋铁件,安装时与门框连接件焊牢。

      3, engineering building door frame can be fixed by bolts and wall body, also can be in masonry wall in the mouth of the cave in embedded iron, installed with welded frame fitting.

      4、门框与墙体不论采用何种连接方式,每边均不应少于3个锚固点,且应牢固连。

      The door frame and the wall of the wall no matter what connection method, each side should not be less than 3 anchor points, and should be strong connect.

      5、工程楼宇门上的拉手、门锁、对讲系统、观察孔等五金配件,必须齐全;多功能工程楼宇门上的密码护锁、电子报警密码系统、门铃传呼等装置,必须有效完善。

      Hardware accessories such as hand-holding, door lock, intercom system and observation hole of the engineering building are necessary. The password protection lock, electronic alarm password system, doorbell, etc., must be effectively perfected.

      6、安装工程楼宇门时,应先找直、吊正,尺寸量合适后将其临时固定,并进行校正、调整,无误后方可以进行连接锚固。

      6, installation engineering building door, should first find straight, condole is, measured right after the temporary fixed, and correcting, adjust, and correct the rear can connect anchorage.

      7、要求与地平面的间隙应不大于5mm。

      The clearance should not be greater than 5mm.

      8、门框与门扇之间或其它部位应安装防盗装置。

      The door frame shall be installed against the door fan or other parts.

    同类文章:
    • 手机站